Formulated with the ideal blend of high-grade solvents, ammonia and patented detergent technology, ACTION 150 S effectively strips heavy build up of floor waxes and metal finishes. It is a powerful yet cost effective product that will do the job where other standard strippers fail.
Areas of Use
ACTION 150 S should be used with confidence to strip polishes from vinyl, rubber, parquet, cement, slate, marble, granite, terrazzo and most type of tiles.
Strips through tough commercial waxes, sealers and finishes that conventional strippers cannot handle.
Does the job much faster, saving both time and labour. This makes for extremely efficient stripping of floors.
Directions for Use
Dilution rate varies according to degree of wax build.
Heavy build up, dilute 1:5 with water
Normal build up, dilute 1:12 with water
– Test on isolated floor area to ensure no adverse effect occurs.
– Spread solution on floor, allow to set for about 5 mins. Scrub using a rotary machine with black pad for total stripping, or green pad for surface stripping. Do not use machine agitation for wood floors, just mop. Vacuum up the residue with a wet/dry cleaner.
– Mop and rinse thoroughly with water to remove all residues. Allow complete drying before applying a good sealer or finish such as PREMIUM SHIELD or SUPER COATING.
As with most chemical products, avoid ingestion and eye contact. If ingested, dilute by drinking water and seek medical help. If product enters eyes, flush with water and seek medical help. Rubber gloves should be worn when handling product. Wash hands thoroughly with soap and water after use.